Harvia Fenix WiFi Touch Screen — Replacement Display

This is the touch screen only for the Harvia Fenix control system, the panel you mount on the wall and actually use. If your Fenix screen has been damaged, you're upgrading to the WiFi version, or you want to move the panel to a new spot without replacing the whole system, this is the part you need. Your existing power unit (control box), sensor and wiring all stay in place.

It's the same 4.3-inch glass touch screen supplied with a new Fenix: a clean, icon-based interface with Mild, Cozy and Hot profiles, custom scenes, light and fan control, and remote start and scheduling through the MyHarvia app.

Want remote start through the app? Harvia requires a door sensor for that. If your sauna doesn't already have one, add the Harvia door sensor to your order.

Features

• 4.3" colour glass touch screen
• Built-in WiFi for the MyHarvia app (2.4 GHz network)
• Preset and custom profiles, child lock and guest mode
• Controls lighting and ventilation (with a compatible power unit)
• Over-the-air software updates
• Surface or flush mount, including inside the sauna (flush mount only inside the hot room)

Compatibility

• Harvia Fenix FX110 and FX170 (incl. Combi FX110C)
• Harvia Xenio CX110 and CX170 power units (WiFi upgrade from older Xenio panels)

Not 100% sure which system you have? Send us a photo of the label on your power unit and we'll confirm before you order, no pressure.

Most panel swaps are plug-and-play. If any mains wiring needs to change, that part should be done by a licensed electrician.